|
|
|
Tsurumi Pumps
LATIN AMERICAN DIVISION
|English|Español|
|
LSC Series
Residual Water - Dewatering Pump
|
FEATURES
|
APPLICATIONS
|
|
1. Semi-open, Ductile Iron impeller with replaceable/adjustable wearplate and built in check valve allows for residual water removal down to 3/64 of an inch.
|
1. Residential, commercial, industrial residual drainage.
|
|
2. Double inside mechanical seals with silicon carbide faces, (both top and bottom) running in an oil filled chamber and further protected by a lip seal running against a replaceable, 403
stainless steel shaft sleeve, provides for the most durable seal design available.
|
2. Basement sump pump (does not require a sump)
|
|
3. Highly efficient, continuous duty air filled, copper wound motor with class E, insulation minimizes the cost of operation.
|
3. Decorative waterfalls and fountains.
|
|
4. Built in thermal and amperage sensing, protector prevents motor failure due to overloading or accidental run - dry conditions.
|
|
|
5. Double shielded, permanently lubricated, high temperature C3 ball bearings rated for a B-10 life of 60,000 hours, extend operational life.
|
|
|
6. Top discharge, flow-thru design enables operation at low water levels for extended periods.
|
|
MAJOR STANDARD SPECIFICATIONS
|
SPECIFICATIONS
|
STANDARD
|
OPTIONS
|
|
Discharge Size
|
3/4 Npt (19 mm)
|
Available in all Stainless Steel
|
|
Horsepower Range
|
1/2 Hp. (.4Kw)
|
|
Performance Range
|
|
Capacity
|
5 - 32Gpm (.018 - .12 cubic metre/ min)
|
|
Head
|
3 Ft. - 34Ft. (.91 - 10.3 m)
|
|
Maximum water temperature
|
104F. (40C)
|
|
Materials of Construction
|
|
Casing
|
Cast Iron
|
|
Impeller
|
Ductile Cast Iron
|
|
Shaft
|
403 Stainless Steel
|
|
Motor Frame
|
Aluminium alloy
|
|
Fasteners
|
304 Stainless Steel
|
|
Mechanical Seal
|
|
Upper Seal
|
Ceramic/Carbon (1Hp)
|
|
Lower Seal
|
Silicon Carbide / Silicon Carbide
|
|
Elastomers
|
NBR (Nitril Buna Rubber)
|
|
Impeller Type
|
Semi-open, solids handling
|
|
Solids Handling Capability
|
Screen opening
|
|
Motor Nomenclature
|
|
Type, Speed, Hz
|
Air Filled, 3600 Rpm, 60 Hz.
|
|
Voltage, Phase
|
115V, Single Phase
|
|
Insulation
|
Class E
|
|
Bearings
|
Pre-lubricated, Double Shielded
|
|
Accessories
|
Submersible Power Cable 16' (4.87 m)
|
Length as Required
|
|
Operational Mode
|
Manual
|
|
60 Hz.PERFORMANCE CURVES FOR LSC SERIES
50 Hz.PERFORMANCE CURVES FOR LSC SERIES
|
