|
|
|
Tsurumi Pumps
LATIN AMERICAN DIVISION
|English|Español|
|
CL Series
Dewatering Pump, All 316 SS Construction
|
FEATURES
|
APPLICATIONS
|
|
1. Semi-open, Cast 316 Stainless steel impeller with field replaceable/adjustable wearplate increases operational life.
|
1. Residential, commercial, industrial dewatering and site drainage.
|
|
2.Double inside mechanical seals with silicon carbide faces (both top and bottom) and viton elastomers, running in an oil filled chamber and further protected by a exclusionary lip seal,
providing for the most durable seal design available. 7 1/2 - 15 HP models are provided with seal relief ports.
|
2. Chemical spill containment.
|
|
3. Highly efficient, continuous duty air filled, copper wound motor with class E or F insulation, minimizes the cost of operation.
|
3. Decorative waterfalls and fountains.
|
|
4. Built in thermal and amperage sensing, protector prevents motor failure due to overloading or accidental run - dry conditions.
|
4. Raw water supply from rivers or lakes.
|
|
5. Double shielded, permanently lubricated, high temperature C3 ball bearings rated for a B-10 life or 60,000 hours provide for extend operational life.
|
|
|
6. Optional TOS All 316 SS Slide rail system is available for models from 7 1/2 - /5 HP.
|
|
MAJOR STANDARD SPECIFICATIONS
|
SPECIFICATIONS
|
STANDARD
|
OPTIONS
|
|
Discharge Size
|
2" - 4" Npt (50 - 100 mm)
|
Available in all Stainless Steel
|
|
Horsepower Range
|
1/2 - 15 Hp. (.4 - 11 Kw)
|
|
Performance Range
|
|
Capacity
|
20 - 550 Gpm (.075 - 2.08 cubic metre/min)
|
|
Head
|
7 Ft. - 130 Ft. (2.1 - 39.6m)
|
|
Maximum water temperature
|
130 F. (54.4 C.)
|
|
Materials of Construction
|
|
Casing
|
316 Stainless Steel
|
|
Impeller
|
316 Stainless Steel
|
|
Shaft
|
316 Stainless Steel
|
|
Motor Frame
|
316 Stainless Steel
|
|
Fasteners
|
316 Stainless Steel
|
|
Mechanical Seal
|
|
Upper Seal
|
Silicon Carbide / Silicon Carbide
|
|
Lower Seal
|
Silicon Carbide / Silicon Carbide
|
|
Elastomers
|
Viton
|
|
Impeller Type
|
Semi-Open, solids handling
|
|
Solids Handling Capability
|
Screen Size
|
|
Bearings
|
Prelubricated, Double Shielded
|
|
Motor Nomenclature
|
|
Type, Speed, Hz
|
Air Filled, 3600 Rpm, 60 Hz.
|
|
Voltage, Phase
|
115/230 V., 1 Ph, 208/230/460V, 3Ph
|
|
Insulation
|
Class E (1/2 - 5 Hp), F(7.5 - 15 Hp.)
|
|
Accessories
|
Submersible Power Cable 32' (9.75m)
|
Length as Required
|
|
Operational Mode
|
Manual
|
|
60Hz. PERFORMANCE CURVES FOR CL SERIES
50Hz. PERFORMANCE CURVES FOR CL SERIES
|
